Bulkhead Fitting – Big Shot Supplies

Bulkhead fittings are used as a port to tanks or walls. Polypropylene Bulkhead Tank Fittings are ideal for use as inlets or outlets for valves, pipes, tanks, and totes. Each fitting consists of a body, gasket, and locking nut with wrench flats. Models with left hand threads help ease installation. Rated to a maximum pr

Bulkhead fittings are used as a port to tanks or walls. Polypropylene Bulkhead Tank Fittings are ideal for use as inlets or outlets for valves, pipes, tanks, and totes. Each fitting consists of a body, gasket, and locking nut with wrench flats. Models with left hand threads help ease installation.

Rated to a maximum pressure of 150 psi at 20°/C (70°/F), but drop to under 120 psi at -18°/C (0°F), and 80 psi at 60°/C (150°/F).

Bulkhead fittings are used as a port to tanks or walls. Polypropylene Bulkhead Tank Fittings are ideal for use as inlets or outlets for valves, pipes, tanks, and totes. Each fitting consists of a body, gasket, and locking nut with wrench flats. Models with left hand threads help ease installation. Rated to a maximum pressure of 150 psi at 20°/C (70°/F), but drop to under 120 psi at -18°/C (0°F), and 80 psi at 60°/C (150°/F).

Bulkhead 1/2 FPT - Ss Brewtech

Banjo 316 stainless steel bulkhead fittings are made from the highest quality stainless steel with double sided female NPT threads and EPDM gasket.

316 Stainless Steel Bulkhead, 3/8 in. to 3 in. Sizes

1/2-in x 1/2-in Threaded Female Adapter Union Fitting

Proline Series 1/2-in x 1/2-in Threaded Female Adapter Union Fitting

Engine heat and vibration can destroy a pressure switch or electrical gauge sender within one season of competition use. This special bulkhead fitting

1/8 NPT Female to 4AN Male Bulkhead Connector, Steel

90 Degree Extended Bulkhead Fitting 1/4 NPT to 3/8 Barb

100-micron Stainless Steel Bulkhead Fuel Filter, AN-12 Male Flare – Aeromotive

316 Stainless Steel, Compression x Compression, STAINLESS BULKHEAD - 787YJ7

Bulkhead Fittings – All Sizes – Precision Marine Systems

Radium Bulkhead Fuel Pump Harness and Connectors - RAD Industries Parts Store

Designed to adapt weldless punched holes into 1/2 female threaded connection ports. 1/2 Female threaded 304 Stainless steel Hi-temp silicone o-rings

Bulkhead | 1/2 FPT

Easy to Install Bulkhead Fitting: Give Your IBC A Second Opening., Just cut the correct size hole and insert this 1 1/2 inch NPT bulkhead fitting into

1 1/2 Inch NPT Bulkhead Fitting for Drums and Tanks